• 22.75” (13U)H x 17.2” W x 18.2”D
• Zinc plated steel
• Black medium texture finish
• EMI gasketing and hardware spacing to support FCC B

• Formed sheet metal card cage with integral slot ESD clip
• (14) 8U x 280mm front slots
• (14) 8U x 100mm rear slots

• Front removable/washable inlet filter
• Push pull redundant cooling design with (3) dual fan modules above and (3) dual fan modules below the card cage
• 200 Watts Front Side Cooling
• 30 Watts Back Side Cooling

• (2) DC Input PEMs
• (1) -48VDC A
• (1) -48VDC B
• Rear pluggable into backplane
• Designed to carry 60A
• IPMI Controller and FRU Data Module

• (2) Centered Switch Slots
• (12) Node Slots
• (2) Rear pluggable PEM interfaces
• (2) Rear Pluggable System Management Modules
• (2) Rear Pluggable Power Entry Modules

• 22.75” (13U)H x 17.2” W x 18.2”D
• Zinc plated steel
• Black medium texture finish
• EMI gasketing and hardware spacing to support FCC B

• Formed sheet metal card cage with integral slot ESD clip
• (14) 8U x 280mm front slots
• (14) 8U x 100mm rear slots

• Front removable/washable inlet filter
• Push pull redundant cooling design with (3) dual fan modules above and (3) dual fan modules below the card cage
• 200 Watts Front Side Cooling
• 30 Watts Back Side Cooling

• (2) DC Input PEMs
• (1) -48VDC A
• (1) -48VDC B
• Rear pluggable into backplane
• Designed to carry 60A
• IPMI Controller and FRU Data Module

• (14) Full Mesh Node Slots
• (2) Rear pluggable PEM interfaces
• (2) Rear Pluggable System Management Modules
• (2) Rear Pluggable Power Entry Modules

• Dual redundant shelf management modules
• Rear pluggable
• Pluggable into backplane
• Based on Pigeon Point or Motorola technology

• 3.5" (2U) H x 17" W x 15.2" D
• 19" Rackmount
• Input Power
  • Dual 36-72 VDC Input
  • 48 VDC wired to Backplane
  • AC Input 150 watt to 48 VDC Power Supply
• Backplane Options
• FM02 Series
  • Two Slot 15X Replicated Mesh AdvancedTCA Backplane
  • Dual 48 VDC bussing
• Card Cage Options
  • Two front accessible slots
  • Two rear transition slots
  • Horizontal load
  • Incorporates Simplified Telecom Packaging (STP)
• Cooling
  • Side-to-side cooling
  • Four 42 cfm 3 wire fans
  • Fixed fan tray
  • Cooling for approximately 150 watts per slot

• 8.75" (5U) H x 17" W x 15.2" D
• 19” Rackmount
• Input Power
  • Dual 36 – 72VDC Input
  • 48 VDC wired to Backplane
• Backplane
  • FM06
  • 6 slot full mesh AdvancedTCA backplane
  • Dual 48 VDC bussing
• Card Cage
  • Six front accessible slots
  • Six rear transition slots
  • Horizontal load
  • Incorporates Simplified Telecom Packaging (STP)
• Cooling
  • Side to side cooling
  • Six 60 cfm 3 wire fans
  • Hot plug gable fan tray
  • Cooling for approximately 150 watts per

• 8.75” (5U)H x 17.5” W x 16.4”D
• Zinc Plated Steel
• Black medium texture finish
• EMI gasketing and hardware spacing to support FCC B

• Formed sheet metal card cage with integral slot ESD clip
• (5) 8U x 280mm front slots
• (5) 8U x 100mm rear slots

• Front removable/washable inlet filter
• Push pull redundant cooling design with (3) dual fan modules above and(3) dual fan modules below the card cage.
• 200 Watts Front Side Cooling
• 30 Watts Back Side Cooling

• (2) DC Input PEMs
• (1) -48VDC A
• (1) -48VDC B
• Rear pluggable into Backplane
• Designed to carry 30A
• IPMI Controller and FRU Data Module

3x Replicated Mesh Extended Fabric Interface
PICMG 3.0 Compliant with dual star base interface. 3x Replicated Mesh Extended Fabric connectivity optimized for performance at 6.25 Gb/s and above:

• (5) Full Mesh Node Slots
• (2) Rear pluggable PEM interfaces
• (2) Rear Pluggable System Management Modules
• (2) Rear Pluggable Power Entry Modules

• Dual redundant shelf management modules
• Front pluggable
• Pluggable into backplane
• Based on Pigeon Point or Motorola technology

Physical

• 8.75" 5 (U) High
• 17.2" Wide
• 17.7" Deep
• Weight is approximately 50 lbs

Structure

• Pre-plated Steel
• Black medium texture finish
• EMI gasketing and hardware spacing to support FCC B

Card Cage

• Formed sheet metal card cage with integral slot ESD clip
• (6) 8U x 280mm front slots
• (5) 8U x 100mm rear slots

Cooling

• Front removable / washable inlet filter
• Push push redundant cooling design with dual fan modules above fan trays capable of cooling 200 watts front side and 30 watts backside
• Target 65dB or less
• Front Pluggable Fan Modules each containing:
• (2) Speed controlled tach output fans
• IPMI Controller and FRU Data Module     

Power Entry

• (2) DC Input PEMs
• (1) -48VDC A
• (1) -48VDC B
• Rear pluggable into backplane
• Designed to carry 50A
• IPMI Controller and FRU Data Module

6 Slot AdvancedTCA Back Planes

3X Replicated Mesh Extended Fabric Interface PICMG 3.0 Compliant with dual star base interface. Extended and fabric connectivity optimized for performance at 10 Gb/s

• (2) Switch Slots
• (4) Node Slots
• (2) Front Pluggable Shelf Management Modules
• (2) Rear pluggable Power Entry Modules

Shelf Management

The 646 Series System supports Dual Redundant Modules that include:Pluggable into backplane

• Pluggable into backplane
• Based on Pigeon Point ShMM Sentry 500 or Intel technology
• Front Panel Display contains:
• Status LEDs for : Power Good, Major, Minor and Critical
• Telco Alarm Connectors
• ShMM Status indicators            

• 8.75" (5U) H x 17" W x 15.2" D
• 19" Rackmount
• Input Power
  • Dual 36 – 72VDC Input
  • 48 VDC wired to Backplane
• Backplane
  • FM06
  • 6 slot full mesh AdvancedTCA backplane
  • Dual 48 VDC bussing
• Card Cage
  • Six front accessible slots
  • Six rear transition slots
  • Horizontal load
  • Incorporates Simplified Telecom Packaging (STP)
• Cooling
  • Side to side cooling
  • Six 60 cfm 3 wire fans
  • Hot plug gable fan tray
  • Cooling for approximately 150 watts per slot